I have tried various settings of setenv's and it always results in a hang.Īll of the original Nand got trashed so all I have flash'ed is the boot that seems to work (?).Īttached is the printenv followed by the boot results ending in the 'hang' I have tried loading the latest version Arch Linux as well as the latest version of Debian shown in this long and winding post. I currently have a UART hooked up and was successful at loading the latest U-Boot in nand that can boot through SD. Hello All - I bricked my Pogoplug Mobile V4 A1-04
#U boot download for pogoplug serial
If that does not help, then you'll need serial console. # Unknown net device (/devices/platform/mv643xx_eth_port.0/net/eth0) (mv643xx_eth_port) # line, and change only the value of the NAME= key.
# You can modify it, as long as you keep each rule on a single # This file was automatically generated by the /lib/udev/write_net_rules Try this first, if it does not work then next step is making sure persistent net rules are either commented out of removed:Ĭat /etc/udev/rules.d/les
log in to another Linux box as root, mount both (assuming USB is sdb1 and SDD is sdc1, mounted under /media) What I would do is: format the SD card to have the same type of file system as the USB (ie. > what's going on? Unfortunately, initramfs net > Do I have to use serial cable for figuring out > if=/dev/working-usb of=/dev/found-sd", but SD card > I already have a working usb stick with that > I know that message doesn't mean it's not working. > kinds of images, it's hang with "Starting I've finally found the sd card whch doesn't show
0 kommentar(er)
